YUEYANG SHENGANG LIFTING ELECTROMAGNET CO.,LTD -

YUEYANG SHENGANG LIFTING ELECTROMAGNET CO.,LTD

Showing 1 - 10 of 11, total 2 pages [First] [Previous] [Next] [Last]

lifting electromagnet model series mw04 for handling single piec
Specification: 165-406mm
Detail: The small diameter round electromagnetis suitable for lifting and transporting single piece of thin steel plate and long steel plate.It can be used as electromagnetic hand to hold extremely small materials.Please pay attention...

lifting electromagnet model series mw84 for handling medium-thic
Specification: 900*300-2520*420mm
Detail: The series of products are specially design for lifting and transporting steel plates of medium-thickness.The lifting operation is safe,accurate and quick.Considering possible bending and deforming may affect safe transportati...

lifting electromagnet model series mw16¡¢mw26¡¢mw36 for handling s
Specification: 1630*1400-4800*3000mm
Detail: This kind of products is suitable for attracting and lifting steel band roll. The products are divided into vertical lifting & transporting type, horizontal lifting & transporting type and general type(which can lift & transpo...

lifting electromagnet series mw29 for handling bundled steel tub
Specification: 1000*600-2200*700mm
Detail: The shape of magnetic pole is flat.It is suitable for transporting bunched steel pipes with various kinds of outside diameter,length and quantity. &©|8226; The surface of magnetic pole is even,so the surface of steel pipe will...

lifting eletromagnet model series mw12 for handled bundled bar m
Specification: 1150*890-1800*1060mm
Detail: The product series is designed as strong permeable magnetic circuit which can penetrate several layers of air***ce;suitable for lifting and transferring bundled bar materials as well as heavy duty steel ingots or steel moulds....

lifting electromagnet model series mw92 for handling small squar
Specification: 1000*600-2100*700mm
Detail: The movable magnetic-pole block,which is installed in magnetic-pole of electromagnet,can stretch out and draw back freely after contacting the attached material. Consequently it can obtain the maximum contacting area.It is sui...

electromagnet used for lifting coiled wire stock(coiled bar)
Specification: 1000*1250-4600*1250mm
Detail: The special magnetic pole is suitable for coiled bar with different diameter.The choice of electromagnet depends on the length of coiled bar.If the electromagnet is long enough,it can lift several coils of coiled bar in direct...

lifting electromagnet model series mw73 for handling and tipping
Specification: 7500*400-200*1300mm
Detail: Suitable for checking the upper and lower surfaces of plate blank and performing tumbling operation when finishing,also for lifting and transporting thick plate and plate blank.When using crane of guide pillar,the electromagne...

lifting electromagnet model series mw03 for handling plate blank
Specification: 700-1800mm
Detail: Applied to lifting and transferring huge steel ingots,continuous casting plate blanks and heavy steel plates.Please use two lifting electromagnets to operate on the plate banks at the length of exceeding 6 meters in order to a...

lifting eletromagnet series mw61 for lifting and transporting st
Specification: 2000*1500-1400*1000mm
Detail: Suitable for lifting and transferring cast ingots and steel scraps in box-shaped cart.


Showing 1 - 10 of 11, total 2 pages [First] [Previous] [Next] [Last]
1 2